complete documents to meet the required purpose

complete statutory and contractual returns accurately and on time

complete the work within the allocated time, in accordance with the

complete the work within the allocated time, in accordance with the programme

complete the work within the allocated time, in accordance with the programme

complete the work within the allocated time, in accordance with the programme of work

complete the work within the allocated time, in accordance with the programme of work 2

complete your work within the estimated, allocated time and performance requirements of the system design, method statement and the required standard

comply with all workplace health, safety and welfare legislation requirements at all times

comply with all workplace health, safety and welfare legislation requirements at all times

comply with and support all organisational security arrangements and approved procedures

comply with and support all organisational security arrangements and approved procedures

comply with legal requirements, industry regulations, organisational policies and professional codes of practice

comply with organisational and legal requirements when resolving conflicts

comply with organisational procedures to avoid the risk of damage to the work and surrounding area by the following:

• protecting the work and its surrounding area from damage

• maintaining a safe, clear and tidy work area

• disposing of waste in accordance with current legislation

comply with organisational procedures to minimise the risk of damage to

comply with organisational procedures to minimise the risk of damage to the work and surrounding area

comply with organisational procedures to minimise the risk of damage to the work and surrounding area by:

• protecting the work and its surrounding area from damage

• maintaining a safe, clear and tidy work area

• disposing of waste in accordance with current legislation

comply with statutory and legal requirements for the works to existing assets

comply with systems which meet statutory requirements for identifying and reducing hazards and reporting accidents and emergencies and prevent recurrences

comply with the given contract information and supervise the activities to form tunnels ensuring the work is carried out efficiently to the required specification in at least one of the following occupational areas:

• hand miner

• shaft miner

• tunnelling machine operator

• machine tunnelling operative

• spoil removal equipment operative

• tunnel services operative

• tunnel transport operator

• tunnel fitter's mate

• tunnel electrician's mate

• sprayed concrete lining tunnelling operative

• pipejacking operative

• micro-tunnelling operative

• separation plant operative

• specialist tunnelling occupations

comply with the given contract information to carry out the work

comply with the given contract information to carry out the work efficiently to the required specification

comply with the given contract information to carry out the work efficiently to the required specification by the following:

• demonstrate work skills to carry out external and internal pre-installation checks, to cover the following: - moisture content of frame at all corners - integrity of Park Home fabric and suspension system - any signs of board warping, bubbling, dry rot - the distance between Park Homes will meet fire regulations following installation - gas pipes, bottles and electrical cables are secure and safe - insect infestation, vermin, animals and protected species

• measure, mark out, calibrate and complete remedial and preparatory work

• use and maintain all work tools

• carry out post installation checks

comply with the given contract information to carry out the work efficiently to the required specification by the following:

• demonstrate work skills to carry out internal pre-installation checks, measure, mark out, calculate, cut, fit, fill, position and secure, make good

• check, record and report issues with construction ventilation, flues, chimneys and combustion air ventilators pre and post installation

• recognise, record and report the key issues that may inhibit commencement of the work including but not limited to: - condition of building fabric - identification of any areas of potential water penetration - visibility and completeness of damp proof course and membranes - condition of window and door seals - height of internal floors in relation to external floor height - drainage and down pipes - protection of existing ventilation in line with design

• identify the potential risk of increased condensation following installation relating to solid floors and how to prevent it

• prepare floor for insulation to includethe following but not limited to: - safe systems of work - minimising damage - checking existing services - building construction and heritage significance - working surface, solid, free from defect, level and dry - customer safety

• check for hidden utilities

• maintain integrity of membranes

• remove and minimise damage to floorcoverings

• clear and safeguard existing and install additional ventilation if required in accordance with the design and installation checks and report back issues which impact the ventilation assessment

• protect the building occupants and their property

• confirm pre-installation material checks are within specified parameters to include checking and reporting defects

• rectify defects in preparation of insulation measures

• prepare and place insulation to solid floors using the following methods to given working instructions: - insulation under a screed - insulation on top of a solid floor - cut, place and tape insulation to manufacturers’ specification - apply damp proof membrane as required - restrict or reduce unwanted heat loss - ensure maintenance of adequate ventilation - minimise the effects of thermal bridging through compliance with design detail and ensuring a consistent level of insulation to the area being insulated

• complete post installation checks in accordance with the design, method statement and installations operations manual and report issues to include but not limited to safeguarding the combustion ventilation and report defects

• provide post installation advice and guidance to building occupants including homeowner packs

• handover and sign off to the customers satisfaction

• use and maintain all work tools and equipment

comply with the given contract information to carry out the work efficiently to the required specification by the following:

• demonstrate work skills to carry out pre-installation checks (external and internal) in regard to building construction, defects and material interfaces

• identify common building defects including but not limited to: - salt contamination - causes of dampness - rain penetration - rising damp - internal moisture vapour - damaged services - structural defects

comply with the given contract information to carry out the work efficiently to the required specification by the following:

• demonstrate work skills to measure, mark out, calculate, cut, fit, fill, position, secure and make good

• carry out external and internal pre-installation check, assessing, recording and reporting issues to include: - suitable access - property suitability - structural integrity - dampness - decay - vents and ventilation - services (gas, electric, water, media cables)

• recognise, record and report the key issues that may inhibit commencement of the work including but not limited to: - condition of building fabric - identification of any areas of potential water penetration - visibility and completeness of damp proof course - condition of window and door seals - height of internal floors in relation to external floor height - drainage and down pipes - protection and existence of sub floor ventilation

• identify the potential risk of increased condensation following installation relating to suspended floors and how to prevent it

• check, record and report issues with under floor (cross flow) ventilation, flues, chimneys and combustion air ventilators pre and post installation

• prepare floor for insulation creating access points taking into consideration the following but not limited to: - safe systems of work - minimising damage - checking existing services - building construction and heritage significance - customer safety

• check for hidden utilities

• maintain integrity of membranes

• remove and minimise damage to floorcoverings

• ensure the minimum void area air space is maintained by removing debris

• clear and safeguard existing and install additional in accordance with the design and installation checks and report back issues which impact the ventilation assessment

• protect the building occupants and their property

• confirm pre-installation material checks are within specified parameters to include checking and reporting defects

• rectify defects in preparation of insulation measures

• assemble, operate, clean and disassemble installation processing equipment

• calibrate equipment to measure density, flow and quality tests

• spray insulation to suspended floors

• maintain existing sound-proofing

• install and maintain fire resistant barriers

• complete post installation checks in accordance with the design, method statement and installations operations manual and report issues to include but not limited to safeguarding the combustion ventilation and report defects

• provide post installation advice and guidance to building occupants including homeowner packs

• handover and sign off to the customers satisfaction

• clean and disassemble installation processing equipment and pack away for transportation

• use all work tools and installation equipment in line with manufacturers and system specifications

• work at height using access equipment

comply with the given contract information to carry out the work efficiently to the required specification by the following:

• demonstrate work skills to measure, mark out, calibrate, monitor, fit and fill, make good

• carry out external and internal pre-installation check, assessing, recording and reporting issues to include: - suitable access - property suitability - structural integrity - dampness - decay - exposure ratings - vents and ventilation - services (gas, electric, water, media cables)

• check, record and report issues with construction ventilation, flues, chimneys and combustion air ventilators pre and post installation

• use and maintain all work tools and installation equipment

• drill holes to specified patterns using depth gauges and right angled drilling only, selecting the correct masonry drill bit, speed and setting, and taking effective steps to minimise the impact to the building fabric and preventing rubble falling into the cavity

• fit cavity barriers

• assemble and operate installation equipment, measuring density, flow and quality tests

• prepare for and install cavity wall insulation to given system designer specification, method statement and the required standard

• fill holes with matching and suitable materials

• clean, disassemble and prepare installation processing equipment for transportation

• handover and sign off to the customers satisfaction

• carry out post installation checks

comply with the given contract information to carry out the work efficiently to the required specification by the following:

• demonstrate work skills to measure, mark out, cut, fit, position, secure and make good

• carry out external and internal pre-installation check, assessing, recording and reporting issues to include: - suitable access - property suitability - structural integrity - dampness - decay - vents and ventilation - services (gas, electric, water, media cables)

• recognise, record and report the key issues that may inhibit commencement of the work including but not limited to: - condition of building fabric - identification of any areas of potential water penetration - visibility and completeness of damp proof course - condition of window and door seals - height of internal floors in relation to finished ground level - drainage and down pipes - protection and existence of sub floor ventilation

• identify the potential risk of increased condensation following installation relating to suspended floors and how to prevent it

• check, record and report issues with under floor (cross flow) ventilation, flues, chimneys and combustion air ventilators pre and post installation

• prepare floor for insulation creating access points taking into consideration the following but not limited to: - safe systems of work - minimising damage - checking existing services - building construction and heritage significance - customer safety

• check for hidden utilities

• maintain integrity of membranes

• remove and minimise damage to floorcoverings

• ensure the minimum void area air space is maintained by removing debris

• clear and safeguard existing and install additional ventilation in accordance with the design and installation checks and report back issues which impact the ventilation assessment

• protect the building occupants and their property

• confirm pre-installation material checks are within specified parameters to include checking and reporting defects

• rectify defects in preparation of insulation measures

• install placed, mechanically or adhesively fixed insulation to suspended floors

• maintain existing sound-proofing

• install and maintain fire resistant barriers

• complete carry out post installation checks in accordance with the design, method statement and installations operations manual and report issues to include but not limited to safeguarding the combustion ventilation and report defects

• provide post installation advice and guidance to building occupants including homeowner packs

• handover and sign off to the customers satisfaction

• use and maintain all work tools and equipment

• work at height using access equipment

comply with the given contract information to carry out the work efficiently to the required specification by the following:

• demonstrate work skills to measure, mark out, fix and finish, position, seal and secure

• carry out external and internal pre-installation check, assessing, recording and reporting issues to include: - suitable access - property suitability - structural integrity - dampness - decay - vents and ventilation - services (gas, electric, water, media cables)

• use and maintain all work tools and equipment

• check, record and report issues with construction ventilation, flues, chimneys and combustion air ventilators pre and post installation

• fit breather membrane and vapour control layers

• assemble and operate installation processing equipment in line with manufacturers and system manuals

• prepare and install Internal wall insulation system to given system designer specification, method statement and the required standard using at least two of the following methods to given working instructions - injected - blown - sprayed

• calibrate equipment to measure density, flow and quality tests to ensure they are in line with manufacturers specifications and material requirements

• protect and reinstate, access routes, existing fixtures and fittings (carpets)

• remove, replace and reinstate skirting, coving and cornices, radiators and electrical sockets

• carry out repairs after installation

• clean and disassemble installation processing equipment and pack away for transportation

• handover and sign off to the customers satisfaction

• carry out post installation checks

comply with the given contract information to carry out the work efficiently to the required specification by the following:

• demonstrate work skills to measure, mark out, fix, finish, position, seal and secure

• carry out external and internal pre-installation check, assessing, recording and reporting issues to include: - suitable access - property suitability - structural integrity - dampness - decay - vents and ventilation - services (gas, electric, water, media cables)

• use and maintain all work tools and equipment

• check, record and report issues with construction ventilation, flues, chimneys and combustion air ventilators pre and post installation

• fit breather membrane and vapour control layers

• prepare and install internal wall insulation system to given system designer specification, method statement and the required standard using the following methods to given working instructions - placed - mechanically or adhesively fixed including thermal boards

• protect and reinstate, access routes, existing fixtures and fittings (carpets)

• remove, replace and reinstate skirting, coving and cornices, radiators and electrical sockets

• carry out repairs after installation

• handover and sign off to the customers satisfaction

• carry out post installation checks

comply with the given contract information to carry out the work efficiently to the required specification by the following:

• demonstrate work skills to remove, measure, mark out, cut, line, level, drill, fit, fix, fill, finish, position and secure

• to carry out external and internal pre-installation checks, assessing, recording and reporting issues to include: - suitable access - property suitability - structural integrity - dampness - decay - vents and adequate ventilation - services (gas, electric, water, media cables) - architectural features - vegetation - rainwater goods - loose surface finishes - external cracking - water ingress - damp proof course

• use and maintain all work tools and equipment

• cut and fix pre-formed trims and mounting blocks

• install pattresses for fixtures and fittings

• apply treatments to existing walls

• prepare and install insulated external wall system in accordance with the specification, design, drawings and method statements to given working instructions

• embed mesh and stress patches in accordance with specification

• carry out mid-install checks to boarding and basecoat stage

• apply mastic aesthetic sealant to all interface, joints and penetration

• install air and vapour control layers

• make good any marks and holes following scaffold removal

• handover and sign off to the customers satisfaction

• carry out post installation checks

comply with the given contract information to carry out the work efficiently to the required specification by the following:

• demonstrate work skills to, remove, measure, calibrate, mark out, cut, line, level, drill, fit, fix, fill, finish, position and secure

• carry out external and internal pre-installation check, assessing, recording and reporting issues to include: - suitable access - property suitability - structural integrity - dampness - decay - vents and ventilation - services (gas, electric, water, media cables)

• use and maintain all work tools and installation equipment

• remove existing defective insulation, boarding, breather membranes and vapour control layers

• assemble and operate installation processing equipment in line with manufacturers and system manuals

• prepare for and install insulation to framed sections of roof, floor, wall or ceiling structures, contained frame or open frame, to given working instructions, using at least one of the following methods - injected - blown - sprayed

• calibrate equipment to measure density, flow and quality tests to ensure they are in line with manufacturers specifications and material requirements

• remove defective timber, localised plaster and render

• fix finishing board, sheathing board and plasterboard

• make good any marks or screw and nail holes

• fit insulation between and/or to timber and metal studwork

• clean and disassemble installation processing equipment and pack away for transportation

• carry out post installation checks to ensure insulation complies with the design

• hand over and sign off to the customers satisfaction

comply with the given contract information to carry out the work efficiently to the required specification by the following:

• demonstration of work skills to, remove, measure, mark out, cut, line, level, drill, fit, fix, fill, finish, position and secure

• carry out external and internal pre-installation check, assessing, recording and reporting issues to include: - suitable access - property suitability - structural integrity - dampness - decay - vents and ventilation - services (gas, electric, water, media cables)

• use and maintain all work tools and equipment

• prepare and remove existing defective insulation, boarding, breather membranes and vapour control layers

• remove defective timber, localised plaster and render

• fix finishing board, sheathing board and plasterboard

• make good any marks or screw and nail holes

• fit insulation between and/or to timber and metal studwork

• carry out post installation checks to ensure insulation complies with the design

• provide post installation advice and guidance to building occupants including homeowner packs

• hand over and sign off to the customers satisfaction

comply with the given contract information to carry out the work efficiently to the required specification for the following:

• demonstrate work skills to measure, mark out, calculate, cut, fit, fill, position, secure and make good

• carry out external and internal pre-installation check, assessing, recording and reporting issues to include: - common infestations - protected species - suitable access - property suitability - structural integrity - dampness - decay - vents and ventilation - services (gas, electric, water, media cables)

• use and maintain all work tools and equipment

• prepare and install insulation to cold roofs using at least one of the following methods in compliance with current regulations and to given work instructions - placed - mechanically or adhesively fixed

• prepare and install insulation to the following in compliance with current regulations and to given working instructions: - pipes - tanks and/or cylinders - access hatches - light wells

• protect electrical services, lighting, media, high amperage cables

• create and protect platforms and walkways for access and storage

• remove and secure building occupants stored items

• install passive ventilation and safe guarding existing ventilation

• insulate and draught-proof access hatches

• insulate light wells

• minimise the effects of thermal bridging

• carry out post installation checks to ensure insulation complies with the design

• provide post installation advice and guidance to building occupants including homeowner packs

• hand over and sign off to the customers satisfaction

comply with the given contract information to carry out the work efficiently to the required specification for the following:

• demonstrate work skills to measure, mark out, calculate, make good

• carry out external and internal pre-installation checks, assessing, recording and reporting issues to include: - suitable access - property suitability - structural integrity - dampness - decay - exposure ratings - vents and ventilation - services (gas, electric, water, media cables)

• use and maintain all work tools and installation equipment

• avoid damage to the building, recognise, record and report the key issues that may inhibit commencement of the work including but not limited to: - condition of building fabric - identification of any areas of potential water penetration - condition of roof

• create and protect walkways and platforms for access and storage

• remove and secure building occupants stored items

• identify and install passive ventilation as required by the design and report any identified ventilation limitations

• identify and report the potential risk of omitted areas in relation to increased condensation following installation relating to roof coverings (pitched and flat) and roof structures (timber, metal, concrete)

• check for and protect hidden utilities

• protect electrical services, lighting, media, high amperage cables

• confirm pre-installation material checks are within specified parameters to include checking and recording batch number and reporting defects

• assemble and operate installation processing equipment in line with manufacturers and system manuals

• calibrate equipment to measure density, flow and quality tests to ensure they are in line with manufacturers specifications and material requirements

• install passive ventilation and safeguard existing ventilation

• prepare and fix pipe, tank and cylinder insulation

• prepare and install sprayed insulation to create a warm roof

• ensure the insulation is contained within the prescribed areas

• ensure insulation around electrical apparatus will not create fire hazards (light fittings, electrical units and cables)

• install and maintain fire resistant barriers where appropriate

• minimise the effects of thermal bridging through compliance with design detail and ensuring a consistent level of insulation to the area being insulated

• clean and disassemble installation processing equipment and pack away for transportation

• provide post installation advice and guidance to building occupants including homeowner packs and data sheets

• complete post installation checks in accordance with the system designer installations operations manual and report issues to include but not limited to safeguarding the combustion ventilation and report defects

• work at height using access equipment and harness systems

• carry out post installation checks

comply with the given contract information to carry out the work efficiently to the required specification for the following:

• demonstrate work skills to measure, mark out, cut, fit, position, secure and make good

• carry out external and internal pre-installation checks, assessing, recording and reporting issues to include: - suitable access - property suitability - structural integrity - dampness - decay - vents and ventilation - services (gas, electric, water, media cables)

• use and maintain all work tools and equipment

• prepare and install insulation to the roof pitch using at least one of the following methods in compliance with system specification, manufacturers’ instructions, current regulations and to given work instructions: - placed - mechanically or adhesively fixed

• prepare and install insulation to pipes, tanks and/or cylinders in compliance with current regulations and to given working instructions

• install air and vapour control layers

• protect electrical services, lighting, media, high amperage cables

• create and protect walkways and platforms for access and storage

• remove and secure building occupants stored items

• install passive ventilation and safeguard existing ventilation in accordance with the system design

• carry out post installation checks to ensure adequate ventilation above and below insulation

• maintain fire resistant barriers

• seal joints, perimeters and penetrations

• minimise the effects of thermal bridging

• complete post installation checks in accordance with the system designer installations operations manual and report issues to include but not limited to safeguarding the combustion ventilation and report defects

• provide post installation advice and guidance to building occupants including homeowner packs

• hand over and sign off to the customers satisfaction

comply with the given contract information to carry out the work efficiently to the required specification for the following:

• demonstrate work skills to measure, mark out, mix, apply and fit make good including any defects

• carry out external and internal pre-installation check, assessing, recording and reporting issues to include: - suitable access - property suitability - structural integrity - architectural features - vegetation - rainwater goods - cracking - position of damp proof course - dampness - decay - vents and ventilation - services (gas, electric, water, media cables)

• use and maintain all work tools and equipment

• apply base coats, reinforcing mesh and stress patches in accordance with the design

• apply corner and surface beads and trims

• apply sealant tapes, strips and mastics

• prepare and apply external wall insulation (EWI) surface finishes to given system designer specification, method statement and the required standard for at least three of the following: - dash finishes - synthetic or non-synthetic renders - proprietary pre-cast finishes - paint finishes - brick slips - brick effect render

• fit weather seals

• carry out post installation repairs

• handover and sign off to the customers satisfaction

• carry out post installation checks

comply with the given contract information to carry out the work efficiently to the required specification for the following:

• demonstrate work skills to, measure, mark out, calculate, make good

• carry out pre-installation checks, assessing, recording and reporting issues to include: - suitable access - property suitability - structural integrity - dampness - decay - exposure ratings - vents and ventilation - services (gas, electric, water, media cables)

• use and maintain all work tools and installation equipment in line with manufacturers and system specifications

• recognise, record and report the key issues that may inhibit commencement of the work including but not limited to: - condition of building fabric - identification of any areas of potential water penetration - condition of roof

• create and protect platforms and walkways for access and storage

• remove and secure building occupants stored items

• identify and remove infested, damaged and contaminated insulation from roof area

• identify and install passive ventilation as required by the design and report any identified ventilation limitations

• identify and report the potential risk of uninsulated omitted areas in relation to increased condensation following installation relating to roof coverings (pitched and flat) and roof structures (timber, metal, concrete)

• check for and protect hidden utilities

• identify insulation materials and their characteristics for cold roofs, pipes, storage tanks, cylinders and access hatches

• confirm pre-installation material checks are within specified parameters to include checking and recording batch number and reporting defects

• assemble and operate installation processing equipment in line with manufacturers and system manuals

• calibrate equipment to measure density, flow and quality tests to ensure they are in line with manufacturers specifications and material requirements

• install passive ventilation and safeguard existing ventilation

• prepare and install blown insulation to cold roofs

• prepare and fix pipe, tank and cylinder insulation

• ensure the insulation is contained within the prescribed areas

• protect downlighters by installation of fire rated caps to the required specification

• ensure insulation around electrical apparatus will not create fire hazards (light fittings, electrical units and cables)

• minimise the effects of thermal bridging through compliance with design detail and ensuring a consistent level of insulation to area being insulated

• install and maintain fire resistant barriers

• clean and disassemble installation processing equipment and pack away for transportation

• complete post installation checks in accordance with the system designer installations operations manual and report issues to include but not limited to safeguarding the combustion ventilation and report defects

• provide post installation advice and guidance to building occupants including homeowner packs, warning labels and data sheets

• work at height using access equipment and harness systems

• handover and sign off to the customers satisfaction

comply with the given contract instructions to carry out the work

comply with the given contract instructions to carry out the work efficiently to the required specification

comply with the given contract instructions to carry out the work efficiently to the required specification

comply with the given information to move, handle or store resources

comply with the given occupational resource information to carry out the work efficiently to the required guidance

comply with the given relevant legislation and official guidance to move, handle or store occupational resources and maintain safe work practices

comply with the given, relevant legislation and official guidance to carry

comply with the given, relevant legislation and official guidance to carry out your work and maintain safe and healthy work practices

comply with the given, relevant legislation and official guidance to carry out your work and maintain safe work practices

comply with the given, relevant legislation and official guidance to carry out your work and maintain safe work practices select the required quantity and quality of resources for the methods of work comply with organisational procedures to minimise the risk of damage to the work and surrounding area comply with the given contract instructions to carry out the work efficiently to the required specification complete the work within the allocated time, in accordance with the programme of work

comply with the given, relevant legislation, standards and official guidance to carry out your work and maintain safe and healthy work practices as stated for each measure to be installed