carry out consultations to identify and confirm safe access points for the site and works which minimise disruption including works traffic and pedestrian segregation

carry out handover inspections, relevant tests and commissioning activities ensuring they are recorded and certificated

carry out instructions on site as directed by your supervisor in order to contribute to the work of a survey team

Carry out measured surveys

Carry out physical testing

carry out recruitment in accordance with your plan, using the agreed selection criteria

carry out research to develop understanding of your organisation's markets and customers

Carry out specified checks of the retrofit works and record that the works conform to quality, standards and compliance with the retrofit design, and manufacturers' instructions, throughout the installation process, for at least eight of the following:

• alterations to the structure

• loadings

• fixings

• corners, junctions and edges of building elements

• interfaces between the building fabric, services and the occupants

• windows and doors including reveals, sills and soffits

• thermal bypass

• thermal bridges

• air tightness

• vapour barriers

• moisture movement

• moisture ingress

• condensation risks

• rainwater goods

• mechanical, electrical and plumbing (MEP)

• fire safety

• acoustic and sound insulation

carry out supervision and provide input into the programmes, plans or schedules which will minimise disruption and maintain optimum performance for at least two of the following tunnelling activities:

• mobile plant and machinery operations

• back up services installation

• operations, maintenance or removal

• spoil removal

• access equipment erection, maintenance or removal

• pipejacking operations

• micro tunnelling operations

• excavation and installation of supports

• shaft and tunnel construction

• tunnel transport

• spraying concrete lining

• operating separation plant

• temporary works

• lifting loads

Carry out surveys

carry out targeted research amongst existing and potential customers to identify opportunities to tender to supply products and services

Carry out the supervision of lifting activities

• carry out the supervision of lifting activities following given data and information which will minimise disruption and maintain optimum performance in relation to the following:

‐ freely suspended loads

‐ above ground operations

‐ below ground operations

‐ lifting of persons

‐ dismantling operations

‐ excess height lifts

‐ multiple lifting

‐ pick-and-carry

‐ where the operator does not have clear sight of the load

‐ loading and unloading

celebrate team and individual successes together

celebrate the achievement of strategic and operational objectives and recognise the contributions of those involved

celebrate the completion of the project, recognising the contributions of project team members

Chair meetings

challenge behaviour and counter messages that conflict with the agreed values

challenge opinions to encourage, generate and recognise innovative solutions

challenge project requirements and stakeholders preferences which do not appear to be realistic, decide valid options and agree them in writing

challenge project requirements and stakeholders' preferences which do not appear to be realistic, decide valid options and agree them in writing

challenge project requirements and stakeholders preferences which do not appear to be realistic, decide valid options and record agreement

challenge stakeholder development intentions which are unclear from the brief or thought to be unsound, discuss them with stakeholders stakeholders, clarify them and resolve them

challenge the status quo and seek better alternatives when required

change the programme or project plan to respond to problems encountered or changes to organisational objectives

change work procedures and practices to allow for different circumstances and conditions

changes

check and adjust equipment so that it is accurate before it is used for taking measurements

check and confirm that insurance has been taken out to provide full cover against accidents and negligence

check and confirm that risk management processes are undertaken

check and confirm that signs, arrangements for personal safety, equipment and site access conform to good practice, legislation and regulation

check and confirm that signs, arrangements for personal safety, equipment and site access conform to good practice, legislation and regulations

check and confirm that the data is complete and reference the data, correctly, to the specification, drawings, manufacturers references and other appropriate standards

check and confirm that the data is complete and reference the data, correctly, to the specification, drawings, manufacturers; references and other appropriate standards

check and confirm that the data is complete and reference the data, correctly, to the specification, other design information and documents, manufacturers' references and other appropriate standards

check and confirm with stakeholders that the information in the brief is adequate, accurate and clearly states the project development requirements

check and confirm with stakeholders that the requirements in the brief are accurate and clearly state the project development requirements analyse the requirements of the brief and check and clarify initial assumptions about the project plan with stakeholders develop a realistic outline project plan which takes account of identified constraints discuss the outline project plan with stakeholders and agree any necessary modifications to the brief, outline project plan, or constraints prepare, present and agree a project plan which meets the requirements of the brief and the expectations of stakeholders

check and confirm with the relevant authorities the requirements, current procedures and likely timescale for statutory approvals and other consents

check and confirm, before starting the condition inspection, that people who will be affected have given their permission

check and confirm, before starting the condition survey, that people who will be affected have given their permission

check and confirm, before starting the test, that people who will be affected have given their agreement

check and confirm, before starting work, that people who will be affected have given their permission

check and ensure compliance with health, safety and welfare systems regularly, in accordance with statutory and project requirements

check and ensure measuring and recording equipment meets the specified tolerances

check and record that the retrofit works conform to quality, standards and compliance with the retrofit design and manufacturers’ instructions, throughout the installation process, for at least fourteen of the following:

• alterations to the structure

• loadings

• fixings

• corners, junctions and edges of building elements

• interfaces between the building fabric, services and the occupants

• windows and doors including reveals, sills and soffits

• thermal bypass

• thermal bridges

• air tightness

• vapour barriers

• moisture movement

• moisture ingress

• condensation risks

• rainwater goods

• mechanical, electrical and plumbing (MEP)

• fire safety

• acoustic and sound insulation

check and verify the survey data to maintain accuracy and integrity

check and verify the test results to maintain accuracy and integrity

check any relevant investigations which have already been made, identify information which is not valid, and obtain additional valid information which is needed

check compliance with your organisation's health and safety policy statement following any significant changes to the environment, practices or legislation

check equipment so that it is accurate before it is used for taking measurements

check from the purchasing plan and users, what materials supplies are needed and prepare orders which meet the supply requirements